Leviton Switch 61110 Rx6 User Manual

Part Number  
3880-DIN  
61110-Rx6  
Component  
Specifications  
eXtreme® 6+ Connector  
See ELECTRONIC FILES for CAD files (.DXF, .DWG, MS-DOS.EPS) on disk  
APPLICATION  
Leviton’s eXtreme® 6+ Connector is designed to be used with all  
Leviton QuickPort® compatible products. The connectors include  
Leviton’s patented “Retention Force Technology” (RFT) which  
promotes consistent performance over the life of the system.  
Includes unique pair separation towers allowing for quicker and  
easier terminations. The connector is configured in a 180°  
configuration such that the punch field is in the back, allowing for  
rear termination.  
STANDARDS COMPLIANCE  
eXtreme® 6+ system components meet or exceed the  
requirements for channel and component-level performance for  
TIA/EIA Category 6, cULus Listed, NOM and ACA.  
PHYSICAL SPECIFICATIONS  
WARRANTY INFORMATION  
For a copy of Leviton product warranties, log on to  
Dimensions:  
Materials:  
.901"H x .575"W x 1.246"D  
Connector body is high-impact, fire-retardant  
plastic rated UL 94V-0. Spring wire contacts  
are high quality copper-based alloy, plated  
with 50 micro-inches of gold over 100 micro-  
inches of nickel for lowest contact resistance,  
maximum life.  
For ELECTRONIC Typical Specs see (.TXT) file on disk.  
TYPICAL SPECIFICATION  
The modular connector shall meet or exceed the requirements  
for channel and component-level performance described in  
DESIGN CONSIDERATIONS  
TIA/EIA-568-B.2-1 Category  
6
standards. The modular  
Use in any QuickPort® housing to support Category 6 UTP  
connectivity in surface mount, flush mount, or modular  
furniture outlets and field configurable panels.  
Can be used in conjunction with other QuickPort® snap-in  
modules for voice/data and video applications over UTP, coax  
and fiber.  
To identify ports: use different colored modules for each  
application (full selection of TIA/EIA-606 compatible colors—  
13 available).  
connector shall be individual snap-in style. The connectors shall  
also be in compliance with all National Electrical Codes;  
compliant with FCC Part 68; UL listed; and independently  
verified. In addition to Category 6 compliance, the connector  
shall have the ability to support high megabit and shared-sheath  
applications. All plastics used in construction of the connector  
bodies shall be fire-retardant with a UL flammability rating of  
94V-0. Termination of all connectors shall be 110-type insulation  
displacement connectors (IDC). The connector shall provide a  
ledge directly adjacent to the 110-style termination against  
which the wires can be directly terminated and cut in one action  
by the installation craftsperson. Connector wiring is universal and  
will accommodate installation color codes for T568A and T568B  
wiring schemes. The termination field shall be in the rear for  
easy access. The modular connector shall fit all other installed  
telecommunications wallplates, outlets and field-configurable  
patch panels and patch blocks. Colors and configurations to be  
specified per schedule on plan.  
INSTALLATION NOTES  
Designed for cable termination with a 110 punchdown tool.  
Detailed installation instructions are included in the standard  
pack.  
IDCs arranged to minimize untwisting.  
For Technical Support Call 1-425-485-4288; in USA call 1-800-824-3005.  
2222 – 222nd St. SE • Bothell, WA 98021 USA  
Tel: 1-800-722-2082 / 1-425-485-4288 • Fax: 1-425-483-5270 • Int'l Fax: 1-425-485-9170 • GSA Schedule Available  
 

KVH Industries Satellite TV System TracVision M3 User Manual
Lathem Network Card ATX6 ATX C User Manual
LG Electronics Clothes Dryer DLE2701V User Manual
Makita Sander 9901 003360 User Manual
Maytag Microwave Oven MMV51566AA MMV5156AC User Manual
McCulloch Lawn Mower Accessory M53 170WFP User Manual
McCulloch Lawn Mower M200117H User Manual
MCE Technologies TV Receiver MCE 201 User Manual
Melissa Styling Iron 635 104 User Manual
Microsoft Video Game Controller 032502 User Manual